237770 Burkert Germany Authorised Sales Partner
If you are looking for the authorised sales partner of the Burkert brand in Germany to purchase the 237770 2/2-way solenoid valve, force-controlled, you are in the right place. As the Germany authorised seller of the Burkert brand, IMPEXRON offers fast delivery and competitive prices for all product groups belonging to the brand.
Request a price
Delivery time:
Determined at the time of quotation
VISA
Mastercard
Bank Transfer
Technical Specification
GENERAL INFORMATION
---------------------
2/2-way solenoid valve, force-controlled
Article number: 237770
Weight: 0.377 kg
Statistical product number: 84818079
MODE OF ACTION
-------------
Fluidic line connection number: 2
Valve function Number of switching positions: 2
Valve function: A - closed in rest position - pressure port 1 (P/NC)
Manual operation: No
PROCESS/LINE CONNECTION
----------------------------
Line connection 1 type: internal thread
Line connection 1 Thread name: 1/2
Line connection 1 Thread type: G
Line connection 2 type: internal thread
Line connection 2 Thread type: G
Line connection 2 Thread name: 1/2
TENSION
--------
Voltage min/Nominal voltage: 230 V
Max. voltage/Nominal voltage: 230 V
Voltage frequency: 50 Hz
Positive voltage tolerance: 10%
Negative voltage tolerance: 10%
AC voltage: Yes
DC voltage: No
Battery Voltage: No
MATERIALS
----------
Valve seat material: stainless steel
Main valve material in contact with the medium: brass
Control of material in contact with medium: PA (polyamide)
PRESSURE & TEMPERATURE
------------------
Backpressure-proof version: No
Nominal pressure min: 0 bar
Max. nominal pressure (liquid): 10 bar
Nominal pressure (DIN EN 1333): PN 10
Minimum medium temperature: -10°C
Max. medium temperature: 80°C
Ambient temperature min: -10 °C
Ambient temperature max: 55°C
SEALING MATERIAL
-----------------
Seat Seal Material Category: Elastomers
Seat seal material: NBR (nitrile rubber)
Outer sealing Material: NBR (nitrile rubber)
Seal pilot material: NBR (nitrile rubber)
APPROVALS
-----------
Rated power: 8 W
NOMINAL SIZE (KV VALUE)
-------------------
Kv value (water): 1.9 m3/h
Pre-control nominal size (mm): 1.2 mm
Main valve size 1 (P) (mm): 10 mm
Main valve size 1 (inch): 3/8 inch
DEVICE PROPERTIES
-------------------
Type: 6213
Drive type: lift anchor
Operation: servo-controlled
Media separation: No
Air flow: via seat
Main valve operating principle: diaphragm valve
Valve construction: valve complete
Switch function: on/off
Open switching time min: 10 ms
Open switching time max.: 30 ms
Close switching time min: 100 ms
Close switching time max.: 150 ms
Nominal operating mode/duty cycle: 100%
Vacuum version: No
Analysis version: No
Valve setting opening time: No
Valve setting closing time: No
Oil burner valve: No
Steam version: No
Central-bolted pilot control: Yes
Core guide: slide ring
Installation length: 50 mm
Main valve with integrated strainer: No
ELECTRICAL CONNECTION
----------------------
Electrical connection type: connector diagram form A according to DIN EN 175301-803
Electrical connection Number of contacts: 2 + protective conductor
Device outlet included: not included
Electrical connection position: left in flow direction
DEGREE OF PROTECTION
---------
Protection class (IP max. with suitable connection): IP65
COIL (CORE)
------------
Low-noise version: No
Spool type: plugged in
Spool material (jacket): PA (polyamide)
Spool size: 32mm
coil circuit surge protection: none
Coil circuit rectifier: No
Coil circuit pole protection: No
Freewheeling diode coil circuit: No
Drive thermal insulation class: B
Switch-on capacity AC: 24 V·A
Rated power AC: 8 V·A
Part in contact with the medium Core Material: stainless steel
Part in contact with the medium Plug Material: stainless steel